Dewaxing Filter

Dewaxing

Dewaxing / Deoiling Filters

De-waxing Filters are designed to produce wax free oil and oil free wax in the Petroleum Industries, especially in the lube oil plant.
BP-SPS . solvent oil Dewaxing and Deoiling filters are designed for the safe, high capacity removal of wax from lubricating oils at low operating temperatures. Totally enclosed and sealed construction, Positive seal of the valve, rigid support construction of the tank, screen support deck construction and spring mounted Teflon scraper which maintains preset position and is not affected by temperature variations are major features. These units can be instrumented and automated for continuous processing.

 

Rotary Vacuum Drum Filters

BP-SPS. Continuous vacuum drum filters are designed to handle the broadest range of slurries of any filter. This permit drum filters to be used in a variety of applications.
Vacuum filters allow a more complete separation of solids from liquids than other mechanical dewatering filters. Vacuum filters are not as dependent on specific gravity differentials for the degree of clarity, nor are they subject to upset due to variation in the process.
BP-SPS drum filters provide high filtration rates and have excellent washing characteristics. Wide variations are possible in cycle time to ensure optimum cake formation, dewatering and washing on any application flow sheet. BP-SPS drum filters are ideally suited for filtering solids when cake washing is necessary when a uniform deposit of cake on the media is desired, or when the cake is difficult to discharge.


The five basic discharge types are:
SCRAPER DISCHARGE


The BP-SPS. Scraper discharge RVDF medium is usually caulked into grooves in the drum grid, with cake removal facilitated by a scraper blade just prior to the re-submergence of the drum.
The scraper serves mainly as a deflector to direct the cake, dislodged by an air blowback, into the discharge chute, since actual contact with the medium would cause rapid wear. In some cases the filter medium is held by circumferentially wound wires spaced 50 mm (2 in) apart, and a flexible scraper blade may rest lightly against the wire winding.
Excellent for heavy solids and typical slurries are easy to filter.
BELT DISCHARGE

The BP-SPS Belt discharge RVDF carrying a fabric that is removed, passed over rollers, washed, and returned to the drum. A special aligning device keeps the medium wrinkle-free and in proper line during its travel.
Thin cakes of difficult solids which may be slightly soluble are good applications. When acceptable, a sluice discharge makes cakes as thin as 1.5 to 2 mm (about gin) feasible.

STRING DISCHARGE

The BP-SPS String discharge RVDF system of endless strings or wires spaced about 13 mm (0.5 in) apart pass around the filter drum but are separated tangentially from the drum at the point of cake discharge, lifting the cake off as they leave contact with the drum.
The strings return to the drum surface guided by two rollers, the cake separating from the strings as they pass over the rollers. If it has the required body, a thinner cake (5 mm) than can be handled by drum filters is feasible, allowing more difficult materials to be filtered. This is done at the expense of greater dead area on the drum. Success depends on the ability of the cake to be removed with the strings and must be determined experimentally.
Applications are mainly in the starch and pharmaceutical industries, with some in the metallurgical field.
ROLLER DISCHARGE

ROLLER-DISCHARGE A roll in close proximity to the drum at the point of cake discharge rotates in the opposite direction at a peripheral speed equal to or slightly faster than that of the drum.
If the cake on the drum is adequately tacky and cohesive for this discharge technique, it adheres to cake on the smaller roll and separates from the drum. A blade or taut wire removes the material from the discharge roll.
This design is especially good for thin, sticky cakes. If necessary, a slight air blow may be provided to help release the cake from the drum. Typical cake thickness is 1 to 10 mm (0.04 to 0.4 in).
PRE COAT DISCHARGE

PRE-COAT-DISCHARGE
The BP-SPS Pre-coat drum filters are coated with a bed of diatomaceous earth or similar material. During cycling a clear filtrate is obtained. When vacuum is applied, the liquid is drawn through the pre-coat material, and solids deposited on the pre-coat surface are removed along with a thin portion of the pre-coat by an advancing scraper blade, as the drum revolves. The blade operates independently of the drive to provide a “precision lathe: movement. Depending on the movement of the blade the drum can operate up to a week without retracting the blade to apply a new pre-coat bed.
Pre-coat filters are recommended when small amounts of solids are to be removed from large volumes of liquids, for clarification or polishing of effluent, or for the filtration of material that produces sticky solids. They provide a high clarity of filtrate when the filtrate is the valuable product and the cake is to be discarded.

Equipment capability spans the entire range of Liquid-Solids separation such as:

Rotary Vacuum Drum Filters - Filtration area varies from 0.5 m2 to 70 m2

(Scraper, Belt, Precoat, Roll, String)

 Cane Mud, Bicarbonate and De-waxing and Agidisc filters.

 *          Thickeners                  -           Conventional, Swing Lift and Sludge Thickener

                                                            (Diameter sizes varies from 3 m to 90 m)

 *          High Rate Thickeners -           Diameter Sizes varies from 3 m to 90 m

 *          Clarifiers                     -           Primary & Secondary and Clariflocculator

                                                            (Diameter Sizes varies from 3 m to 90 m)

 *          Reactor Clarifiers       -           Diameter Sizes varies from 3 m to 90 m

 *          Spiral Classifiers         -           Diameter Sizes varies from 12” dia to 96” dia

 *          Aerators                      -           Fixed, Floating, Draft Tube and Air Diffusers

                                                            (Size varies from 3 HP to 100 HP)                                        

*          Mixers                         -           Flocculating, Flash, Conditioners and RDT

*          Others                         -           Rotary Distributors, Aerobic Digestion Plants

and Milk of Lime Plants

*          Mineral Beneficiation -          High Rate Thickeners, Horizontal Belt Filters &

            Equipment                              Spiral Classifiers

*          Pulp Production          -           Brown Stock Washers, Deckers, Bleach Washers

and Recausticizing.

Contact Us

Address: Iran, Shahrekord, Mellat street, 41st Alley, Kazhal building, 3rd floor, 6th unit

 Call: +983832262243

Fax: +982189774939

ManagerWhatapp :+989127135525

What's app office: +989120134542

Emailinfo@bpsps.ir

© all right reserved for Green Baharan Palayesh (BP-SPS) designed by :navidiranian